Hello , New to the forum . What does everyone /anyone think about these new Ammo Checker blocks ? Are they that much different than say a Dillon case gauge ? I know it will be faster to check multiple rounds at a time, Before these blocks came on to the market , the case gauges is all there were, beside caliper , visual and weight / scale checks. What am I missing?
Let's see some Zinc load info 300 blackout 16inch 1/8 twist barrel Lyman Ideal Bullet mold 31141 173gn Zinc drops 106gr projectiles Using H110 16 inch 300 blackout 1/8 twist Load data for a 168gr projectile is 12.5 -15.7gr as per Sierra load data Load data for a 110gr projectile is 17.9 - 20.0gr Starting COAL will be 2.100 and will adjust based on feeding Starting charge will be 15.0 15.7gr = no over psi signs sub moa 16.0 gr= no over psi signs sub moa 2 shots in one hole 16.5 gr no minor psi at 60 degrees signs sub moa at 90 + degrees I may get high psi signs 17.0 gr = higher psi signs but not dangerous 16.0 gr will be my go-to load for this projectile