Let's see some Zinc load info
300 blackout 16inch 1/8 twist barrel
Lyman Ideal Bullet mold 31141 173gn
Zinc drops 106gr projectiles
Using H110
16 inch 300 blackout 1/8 twist
Load data for a 168gr projectile is 12.5 -15.7gr as per Sierra load data
Load data for a 110gr projectile is 17.9 - 20.0gr
Starting COAL will be 2.100 and will adjust based on feeding
Starting charge will be 15.0
15.7gr = no over psi signs sub moa
16.0 gr= no over psi signs sub moa 2 shots in one hole
16.5 gr no minor psi at 60 degrees signs sub moa at 90 + degrees I may get high psi signs
17.0 gr = higher psi signs but not dangerous
16.0 gr will be my go-to load for this projectile
great info ill have to check this out thank you for sharing we love zinc bullets
9mm Load info
CZ p10-c Optic ready
9mm
Lyman 356402 dv mold CZ P10c
115gn mold drops 77gr zinc projectile
4.5gn titegroup
1.145 oal
Load test
3.8 = did not cycle
4.0 = cycled low power
4.5 cycled and power was great good psi signs
5.0 good power but showing minor pressure signs.
4.5gr loads will be the best load for titegroup
Awesome! Im going to try that. Thanks for sharing this!