Let's see some Zinc load info
300 blackout 16inch 1/8 twist barrel
Lyman Ideal Bullet mold 31141 173gn
Zinc drops 106gr projectiles
Using H110
16 inch 300 blackout 1/8 twist
Load data for a 168gr projectile is 12.5 -15.7gr as per Sierra load data
Load data for a 110gr projectile is 17.9 - 20.0gr
Starting COAL will be 2.100 and will adjust based on feeding
Starting charge will be 15.0
15.7gr = no over psi signs sub moa
16.0 gr= no over psi signs sub moa 2 shots in one hole
16.5 gr no minor psi at 60 degrees signs sub moa at 90 + degrees I may get high psi signs
17.0 gr = higher psi signs but not dangerous
16.0 gr will be my go-to load for this projectile
9mm Load info
CZ p10-c Optic ready
9mm
Lyman 356402 dv mold CZ P10c
115gn mold drops 77gr zinc projectile
4.5gn titegroup
1.145 oal
Load test
3.8 = did not cycle
4.0 = cycled low power
4.5 cycled and power was great good psi signs
5.0 good power but showing minor pressure signs.
4.5gr loads will be the best load for titegroup